Online Service

Home >> Products >> Wire connect machine >> Terminal wire crimping machine
PFL-1000 Wire crimping machine
PFL-1000 Wire crimping machine

  • PFL-1000
  • Crimping capacity: 1.0Ton

    Stroke: 30mm

    Terminal:Fixed mould

    Measurement: 24*24*48cm

Product Details


1.With the inverter-driven,it makes the machine without the mechanized operation delay and failure from 

the traditional clutch,and simplify internal mechanical parts,reduce the wearing or replacement. 

2.Large torque,small vibration,high stability,quiet working.Ensure the right amount of force when crimping 

the terminals to wires.

3.Work with a variety of straight,horizontal moulds,various terminals can be crimped in one machine by 

changing the molds.

4.There is the upward and downward punch on the panel,do not need to shake the spindle with a wrench 

when debugging the mould.

5.Adjust the machine working range 1-20times,the working interval time range 0-20min.

Apply for:

Connection with the ressistance of neon,LED and wires.

Slide switch is connected to the wires.

Connect the high temperature of the heating elements.

Sensitive components(such as reed switches,termperature fuses) connection.

Transformer tap connections with wires.

Headphone cable card,set the pipeline fixed.

Wire and lead connections.


Applicable terminalsFixed mould,for some suitable terminals
OperationSingle-action pedal
MotorAsynchronous motor AC220V 250W
PowerAC110V/220V 50/60Hz

Working video:

If anything we can do for you,please contact us any time!